Yamaha Drive & Drive2 Charger Port (2011+)
Yamaha Drive & Drive2 Charger Port (2011+)
Yamaha lithium conversion accessory
Yamaha Drive & Drive2 Charger Port Receptacle (2011+)
An OEM-fit Yamaha charger plug solution for 2011+ Drive / G29 and Drive2 lithium golf cart conversions.
The Epoch Yamaha plug port is the clean finishing piece for a lithium charger install on 2011 and newer Yamaha Drive / G29 and Drive2 carts. This Yamaha Drive charger port and Yamaha Drive2 plug port replaces the old lead-acid charge receptacle location, letting DIY installers route a modern onboard lithium charger connection through the factory charging cutout for a professional, drill-free golf cart charger install.
Built for cleaner Yamaha lithium conversions
OEM-Fit: No Drilling or Body Modifications Required
Keep your Yamaha Drive or Drive2 body panel looking factory after the lithium upgrade.
Universal aftermarket charge ports often mean cutting an extra hole in the plastic body panel. This Epoch Yamaha 2011+ charge receptacle is built for the existing factory charging cutout on compatible Yamaha Drive / G29 and Drive2 carts, helping installers avoid unnecessary body modifications.
The result is a cleaner exterior finish, a more professional-looking conversion, and a charging location that feels natural every time you plug in the onboard lithium charger.
The Cleanest Onboard Lithium Charger Installation
Replace the outdated Yamaha 3-pin lead-acid receptacle with a lithium-ready charging access point.
When Yamaha owners upgrade from lead-acid to lithium, the original 3-pin triangle / clover-style charge receptacle is no longer the right interface for the new onboard lithium charging setup. This golf cart lithium conversion port gives the cart a clean exterior access point for the charger connection, so daily charging can be as simple as plugging into the charger inlet through the side of the cart.
Weather-Resistant & Built for the Elements
A cleaner exterior plug-port solution for golf course, neighborhood, and utility-cart use.
Golf carts see sun, rain, vibration, dust, and repeated plug-in cycles. This charger port receptacle is designed as an exterior-facing accessory for compatible Yamaha carts, helping keep the charger access point secure and integrated with the cart body. As with any electrical connection, install the charger and wiring correctly and avoid spraying high-pressure water directly into the inlet.
Exact-Fit Yamaha Bezel
Designed for 2011+ Yamaha Drive / G29 and Drive2 carts so the lithium charger port can sit in the original charging location instead of looking like an aftermarket patch.
3-Pin Triangle Plug Replacement
A practical solution when removing the original Yamaha lead-acid charging receptacle and converting the cart to an onboard lithium charging system.
120V AC Extension Cord Access
Provides a clean exterior access point for compatible onboard charger wiring so users can connect charging power without loose cables hanging out of the cart body.
Compatible applications
Yamaha Drive, Drive2, and lithium golf cart charger installations.
- ✓ 2011+ Yamaha Drive / G29 lithium golf cart conversions.
- ✓ Yamaha Drive2 golf cart lithium charger inlet installations.
- ✓ Replacing the old Yamaha 3-pin triangle / clover-style lead-acid charge receptacle location.
- ✓ Routing a new onboard lithium charger connection through the factory charging cutout.
- ✓ DIY lithium golf cart upgrades where a clean, OEM-style exterior plug location matters.
- ✓ Professional golf cart shops installing Epoch lithium kits on late-model Yamaha carts.
- ✓ Avoiding universal charging ports that require cutting new holes in the body panel.
Product benefits
Small part, cleaner install, better customer experience.
Technical Specifications
Fitment, application, and installation details for Yamaha lithium conversions.
| Product details | |
|---|---|
| Product name | Yamaha Drive & Drive2 Charger Port (2011+) |
| Brand | Epoch Batteries |
| SKU | EP-Receptacle-YA2011 |
| Product type | Golf cart charger port receptacle / plug-port bezel |
| Primary use | Lithium onboard charger port integration for compatible Yamaha carts |
| Fitment | |
| Compatible carts | 2011+ Yamaha Drive / G29 and Yamaha Drive2 chassis |
| Primary fitment purpose | Uses the factory charging cutout / mounting location on compatible Yamaha body panels |
| Not intended for | Older Yamaha G-series carts with different charge-port body openings and bezel layouts |
| Installation style | OEM-style / drill-free fitment path for compatible models |
| Installation and application | |
| Charging system use | For golf cart lithium conversion and onboard charger installation |
| Replaces | Factory Yamaha 3-pin triangle / clover-style lead-acid charge receptacle location |
| Charger included | No — receptacle / port only |
| Battery included | No |
| Recommended pairing | Epoch onboard lithium charger or complete lithium golf cart kit where compatible |
| Design notes | |
| Exterior appearance | Designed for a clean factory-style finish on compatible Yamaha carts |
| Body modification goal | Avoids cutting a separate universal charger-port hole when installed in the compatible factory location |
| Maintenance note | Inspect mounting hardware and charging connection area periodically for debris, looseness, or damage |
Lithium conversion install tip
Finish the charger install before buttoning up the cart.
The charger port is one of the most visible parts of a Yamaha lithium upgrade. Installing this plug port during the battery and onboard charger conversion helps keep the cart exterior clean, prevents dangling charge cords, and gives customers a simple daily charging point.
Yamaha Drive & Drive2 Plug Port FAQs
Common questions about Yamaha Drive2 fitment, older Yamaha G-series carts, charger compatibility, and lithium conversion installation.
Will this fit my Yamaha Drive2 golf cart?
Yes. This Yamaha Drive2 plug port is designed for 2011 and newer Yamaha Drive / G29 and Drive2 golf carts. It is made to fit the factory charging cutout used on those late-model Yamaha chassis for a clean lithium charger inlet installation.
Will this fit older Yamaha G-series carts like a G16 or G22?
No. This Yamaha 2011+ charge receptacle is molded for the 2011 and newer Yamaha Drive / G29 and Drive2 body style. Older Yamaha G-series carts from earlier model years use different charging bezel shapes and mounting layouts, so verify your cart year and body style before ordering.
Do I need to drill new holes in my cart to install this?
For compatible 2011+ Yamaha Drive and Drive2 carts, this port is intended to use the factory charging cutout and existing mounting location. It is designed as a drill-free golf cart charger install accessory so you can avoid cutting a new universal hole in the body panel.
Why do I need a new charger port when upgrading to a lithium battery?
Factory Yamaha lead-acid charging systems use a 3-pin style lead-acid receptacle. When you upgrade to a lithium system with an onboard charger, this golf cart lithium conversion port gives the cart a clean exterior opening for the charger connection, helping the conversion look factory instead of improvised.
Does this product include the actual lithium charger?
No. This product is the charger port receptacle / bezel only. It does not include the onboard lithium charger, lithium battery, extension cord, or conversion wiring. If you are doing a full lithium conversion, purchase the correct Epoch lithium battery kit or charger separately.
Is the receptacle weather resistant?
It is designed as an exterior-facing golf cart charger port accessory for Yamaha Drive and Drive2 carts. Install it correctly, keep electrical connections protected, and inspect the port periodically for dirt, debris, damage, or loose hardware. Do not pressure-wash directly into any charger inlet or electrical connection.
What plug style does this replace?
This part is intended to replace the factory-style Yamaha lead-acid charge receptacle opening on compatible carts, often described by owners as the 3-pin triangle or clover-style charger receptacle. It helps adapt that location for a lithium onboard charger inlet or AC charging access point.
Can I use this with any 120V AC extension cord?
The port is intended to help create a clean cart-side access point for the onboard charger connection. Use only extension cords and charging equipment that meet your charger manufacturer’s requirements, including proper grounding, amperage rating, outdoor suitability, and safe routing.